Protect Your Pride And Joy With The Ghost Immobiliser
Ghost Immobiliser will protect your prized property from theft. It's discreet and does not require any additional key fobs.
The device utilizes buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence of up to 20 presses. This will then allow your vehicle to begin.
Simple process to change the PIN code
Many owners are upgrading their security because of the rising number of vehicle thefts. There are many kinds of aftermarket security devices that range from tracking systems to alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. While a tracking device can assist you in locating your car in the event of theft, it will not prevent the crime from happening in the first place. Immobilisers, however perform exactly as they say on the tin - they shut down the motor of your car so that it isn't able to be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to take your vehicle.
Utilizing the buttons already in your car, the ghost device creates an exclusive sequence that has to be entered before the engine can start. This can be done by using the window, heater or indicator stalk buttons. In addition to this it is possible to use an app on mobile that can act as an emergency PIN code bypass and allow the driver to operate the car without using the button sequence. This option is particularly useful when you need to hand your car over to a valet service or parking, as the immobiliser will remain active and not deactivated.
The Ghost is an innovative and unique device that operates with the buttons of your vehicle instead of as a standalone device. It's not just an effective deterrent to theft of your vehicle however, it can be used to secure any future vehicles you own. This makes it a much better investment than a traditional wheel lock.
Weatherproof, tiny device
The Autowatch ghost immobiliser is a sophisticated security system that guards your car from key cloning, hacking and ECU swapping. It is a small weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be plugged into the vehicle without wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant to jamming devices that are a common technique used by thieves to get around the immobilisers in place.
The benefit of CAN data over traditional systems is that they operate in a silent manner. It cannot be detected using sophisticated RF scanning and code-grabbing techniques as well as detected by traditional diagnostic tools. The Autowatch ghost doesn't produce LEDs, but instead utilizes the buttons on your vehicle, such as the steering wheel or centre console panels to create a unique, programmable disarm sequence. You can even make this sequence as long as 20 presses to increase security. The iPhone app is limited to one connection, using a unique pairing code for the Ghost. ghost car immobiliser between the two devices is secured.
The Ghost also prevents car thieves from adding an additional key or replacing the ECU to bypass the immobiliser and begin the engine. The engine will only run when a valid PIN code is entered. It is also possible to put it into Valet/Service mode for temporary operation (with set parameters such as 30mph speed limit) to allow you to transfer your vehicle to a valet service or to be serviced without needing to enter a PIN.
Each vehicle is tested
The Autowatch Ghost is the world's first aftermarket CAN bus immobiliser that is able to be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device intercepts signals to stop your car from operating normally until you enter a custom code. The system can be activated or deactivated through your smartphone's application without the need for additional wires.
The factory-installed immobilisers function by using a transponder that is integrated into the key. This sends a message to the ECU. The car will start when the correct code is transmitted. If, however, the transponder from another vehicle is used instead, the immobiliser won't recognize it. This allows the vehicle be started and stolen. The Ghost immobiliser has been developed by an South African company at the top of the line in vehicle security technology. It safeguards your car from key cloning, hacking and even key theft. Only by physically towing your vehicle away could a thief take it away and not be able to drive it.
Ghost makes use of buttons in your vehicle, like the indicator stalk, steering wheel, and door panels, to generate a unique PIN code that must be entered in order to use your car. This is done without any additional hardware, like keys fobs. It can take up to 20 presses. It is also inaccessible to diagnostic equipment and doesn't transmit radio frequency signals, so thieves are not able to make use of sophisticated RF scanning or code-grabbing technology to detect that the security system has been installed.
Unlike physical anti-theft devices like clamps or wheel locks Ghost is hidden within the vehicle so it can't be removed or disabled by thieves and is also harder to remove than a car alarm, which requires disarming via the use of a button sequence. This makes it a great complement to a GPS tracker that can assist in locating your car after it has been taken.
Emergency PIN code override
You don't have to go far on social media sites to find stories or even videos of vehicles that have been stolen by car thieves employing the most advanced technology tools available to them. This includes key-cloning and hacking devices that allow them to start your vehicle without the original key fobs.
Our Ghost immobiliser fights this and provides you with an additional layer of security to stop your vehicle from being taken in the event of being targeted by thieves. It works by creating an individual pin code sequence that is triggered by your buttons on the steering wheel, door panel, and centre console. This unique PIN has to be entered together with your original key fob to prevent the vehicle from starting. The unique override pin can be found on the black card that you will receive following installation. It is simple to remember since there are no LED indications.
The device is hidden within the vehicle's wiring and does not emit radio signals. Therefore, it cannot be detected using diagnostic software that can tell what type of security systems you have installed. This makes it a fantastic alternative to the tracker.
In contrast to other security systems that rely on a relay located in the engine bay, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This enables them to shut down the vehicle completely with a digital block of commands to both the ECU and the engine.
They can also be connected to a separate analogue alarm immobiliser, tracker or alarm. This must be specified prior to the installation. They are also compatible with valet and service modes, and are a great alternative to a tracking device if you bring your vehicle to the dealer for an electrical issue.
Service/Valet mode
In recent times there has been an rise in the number of vehicles being stolen with no owner's keys. It's more easy than ever to steal your pride & joy thanks to the availability of key cloning tools and door lock picks. We have developed the Autowatch Ghost Immobiliser to combat this. It prevents your car from being driven, even if your keys have been cloned.
It directly communicates with your car's ECU (Engine Control Unit) through the CAN data circuit. It's completely quiet since it doesn't use radio frequency or keys fobs. It cannot be detected using diagnostics or any other hacking device. It also prevents the addition of the key to a new one or replacing the ECU to bypass the system, since only the correct PIN code will allow the engine to start.
The device is hidden within your car and can be reached via the buttons on your steering wheel, center console, and door panels. A unique & changeable PIN code sequence up to 20 digits needs to be entered before you are able to start your vehicle.
This is the first aftermarket CAN-bus immobiliser that was designed. It will stop your vehicle from being driven or even started in the event that you do not enter a PIN number first. If you are driving away with the device in motion it will display an indicator on your dashboard which will flash continuously for approximately 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to function just as normal. If you don't enter your PIN at this point the indicator will continue to flash and will require a new pin code every time you try to start your car.